ホーム>
設置機器>
生化学系機器|3階> 超遠心機室>
高速冷却遠心機2
Home >
Equipment >
Biochemistry Field | 3F > Ultracentrifuge Lab >
High-speed Centrifuge 2
高速冷却遠心機2|High-speed Refregirated Centrifuge 2
(Beckman-Coulter Avanti HP-26XP)
平成21年度新設 (new 2009)
【用途の大要】[Uses]
- 固定角ローターによる最大3Lの高速冷却遠心。
- 大型水平ローターによるマイクロプレート、コニカルチューブ等の遠心。
- High-speed, large volume (max. 3L) centrifugation using fixed-angle rotor.
- Centrifugation of conical tubes or microplates using horizontal rotor.
【仕様】[Spec]
-
固定角ローター|Fixed-angle rotors
| Rotor |
Max Speed |
Max g-force |
Tubes
Vol. x Number |
| JLA-10.500 |
10,000 rpm |
18,600×g |
500mL×6 |
| JA-14 |
14,000 rpm |
30,100×g |
250mL×6 |
| JA-17 |
17,000 rpm |
39,800×g |
50mL×14 |
| JA-21 |
21,000 rpm |
50,400×g |
10mL×18 |
-
水平ローター|Horizontal Rotor(All Spin JS-5.3)
- Max Speed: 5,300rpm
- Max g (RCF): 6,130 x g
- バケット/キャリアー数|Number of Buckets/Carriers: 4
- コニカルチューブ用アダプタ(現有は2種)|Adapter for conical tubes (2 types)
- Black: for 30mmφ (50 mL), 7 x 2 tubes
- Green: for 17mmφ (15 mL), 18 x 4 tubes
- マイクロプレートキャリアー|Microplate carrier
for standard plate: 6 x 4 plates
【使用上の注意】[Usage & Precaution]
- 「予約システム」で予約して使用してください。
メモ欄に使用ローター名を記してください。
- 駆動軸のローター受け爪が2本になっています。
ローターの2本のピンを駆動軸の2本の爪の並びに沿って載せてください。(爪の間に入れない。)
- 水平ローターのバケットは、必ず4個かけて運転します。
- マイクロプレートキャリアーの底のゴムパッドが外れやすいので注意して下さい。
- ローター/バケットの取扱に注意を払い、使用後は洗浄、乾燥の後、元の場所へ戻してください。
- Reserve the centrifuge using "Reservation system".
Note the rotor name.
- The rotor should be placed as the two pins are parallel to the two claws on the shaft of the centrifuge.
- All four buckets must always be installed in use of the horizontal rotor.
- Pay attention that the bottom pad of the microplate carrier is not fixed.
- Rotors should be cleaned and dried after use.
【利用料金】[Charge]
【管理担当】[Contact]
Last major update (5/29/2012)
生命科学先端研究支援ユニット 分子・構造解析施設(旧実験実習機器センター)
Division of Drug and Structural Research (Former Scientific Instrument Center), LSRC